Professional Audio

MZW 2

MZW 2 windshield
The MZW 2 windshield effectively reduces pop noise. In outside applications, wind noise can be suppressed up to a certain degree. When working with persons inexperienced in microphone handling, you should
always use a windshield. When the speaker is leaning back, the MZW 2 also provides maximum protection against respiratory sounds. Two windshields are
included in the MZ 2 accessory kit.

• Colours: black and nickel.

MZM 2/MZM 10

Article-No. 001866

magnetic mount set
The MZM 2 / MZM 10 magnetic mount set enables the attachment of the MKE 2 to T-shirts, sweaters, dresses, etc. - without piercing the cloth. The set
consists of the MZM 2 magnetic clamp and the MZM 10 magnetic mount. The MZM 10 magnetic mount is worn around the neckunder the clothing. The microphone cable is inserted into the small cable clip of the MZM 2 magnetic clamp. The MZM 2 and the microphone are then kept in place by the MZM 10.
The microphone cable should be conducted upwards through the neckline to the transmitter. The set is available in white.

Article-No. 047957

ZH 100 pin mount ("Dracula clip")
The ZH 100 pin mount ("Dracula clip") enables secure attachment of microphones to clothing such as sweaters or T-shirts by piercing two pins through the cloth. Springs ensure secure attachment of the pin mount even to thin material. As with other clips and
mounts, the microphone cable is inserted into the small cable clip of the pin mount. Two ZH 100 are included in the MZ 2 kit.

• Colours: anthracite and beige.

NB 2

Article-No. 004398
Article-No. 004349

NB 2 headmic adaptor
The NB 2 headmic adaptor together with the MKE 2 make a lightweight, unobtrusive and fully adjustable head-worn microphone. The microphone cable is inserted into the microphone boom which is adjusted
to fit the contour of the face. The microphone capsule should be just at the side of the mouth to avoid pop noise.

• Colours: black and beige.

Article-No. 003760

condenser mic head
for the 5000 series hand-held
transmitters, super-cardioid.

Article-No. 005249

condenser mic head
as ME 5005, but optimised for
live sound applications.

Article-No. 003763

condenser mic head
for the 5000 series hand-held
transmitters, wide cardioid.

Article-No. 003762

condenser mic head
for the 5000 series hand-held
transmitters, cardioid.

Article-No. 003761

condenser mic head
for the 5000 series hand-held
transmitters, omni.

dynamic mic head
for the 5000 series hand-held
transmitters, super-cardioid.

condenser mic head
for SKM 3072, super-cardioid.

condenser mic head ME 3005 e

Article-No. 004235
Article-No. 004236

steel wire cables
For connecting microphone capsules to bodypack transmitters, different KA 100 S steel wire cables with straight plugs are available. These cables can be used with any attachment device (except MZQ 102) and
are also suitable for attachment of the microphone directly to the head. Steel wire cables fulfil the most stringent demands on mechanical stability and are therefore especially suitable for theatre use. With steel wire cables, the mic capsule can be positioned
extremely accurately.

• Colours: anthracite and beige.

Article-No. 004233
Article-No. 004234

• Colours: anthracite and grey.